Betontools is offering free delivery and free Insurance when you spend over $199** Or Contact us 1800 238 668 Free Call Leichhardt NSW Store

Auscon Post Tensioning Cement PT-80 60X BAGS

Auscon Post Tensioning Cement PT-80 60X BAGS

Auscon Post Tensioning Cement PT-80

Auscon PT 80 is high performance, shrinkage-compensated, aluminate free, post tensioning pre-blended cement grout. It has no sand added, a pre-blended Portland cement base containing carefully selected additives. It is pumpable and has enhanced flowability making it ideal for grouting post-tensioning cables, tendons and other highly stressed cable applications.

Application Advantages & Solutions

  • Flow-Able
  • Pre-Blended
  • No Mistakes
  • High-Strength
  • Just Add water
  • Zero Bleed and High Flow
  • Soil grouting
  • Rock bolting
  • Rock grouting
  • General grouting
  • Bridge construction
  • Post tensioning cable grouting

Grouting pre-tensioned or post-tensioned cables or rods for grouted anchor requirements including cable bolting, earth tie-backs for excavation or soil stabilisation, grouting anchors in tunnel support systems and re-bar grouting.


  • Place 80% of the water into the mixing vessel
  • Slowly add 70% of the powder to the mixing vessel
  • Then add the final 20% of portable water to the mixing vessel
  • Mix for 1 minute
  • Add the remainder of the powder to the mixing vessel
  • Mix for 3-4 minutes or until uniform Water may be added within the ratio limits specified.


Prior to pumping grout, rinse the mixer and flush water through the grout lines thoroughly. Check to ensure that all lines and hoses are clear. Once the site is ready for material pumping, it is important to pump grout continuously to avoid the formation of air pockets and or blockages.

Surface Preparation

All ducts, vents, outlets and inlets should be checked for obstruction

Storage & Clean up

Clean tools and surfaces using clean water prior to curing. Store in cool dry conditions. Shelf Life is 6 months.


Bag: 17kg paper bag. Pallet: 60 bags per pallet. Pallet weight: 1050kg (including pallet).


In the interest of the environment, please dispose empty bag and materials in accordance with local regulations.

Auscon products are manufactured using ISO 9001 Certified Processes.

  • Views: 398
  • Product Code: PT-80
  • Availability: In Stock
  • $1,320.00
  • Ex Tax: $1,200.00

Tags: auscon, post, tensioning, cement, pt-80

Diarex Elite Polishing Disc 100mm POS 3 DE.4V.3For Wet use on Marble, Granite and Engineered Stone.S..
Ex Tax: $31.00
Maxisafe Orange Navy Short Sleeve Polo Features & Benefits Comply with AS/NZS 4602.1.21011 and..
Ex Tax: $14.75
Montolit Diamond Cup Wheels STL125GGFor wet use on Marble, Ceramic and Porcelain. (Fine Grey GF..
Ex Tax: $235.00
Maxisafe STS Shigematsu Sync01VP3 Full Face Respirator STS Shigematsu is Japan’s leading respirator..
Ex Tax: $1,950.00
Diarex Razor 45 Engineered 380mm DB380DR45NGHigh quality blade for mitering Engineered Stone, Porcel..
Ex Tax: $495.00