Pioneer Pro Elastoseal 300ml 27636
Pack size: 300ml cartridge
ElastoSeal Clear is a one-component, neutral cure, low-odor sealant formulated for industrial and electrical applications.
Features and Benefits
- Non-corrosive, VOC-compliant industrial sealant
- Permanently flexible; low modulus
- Weatherproof and excellent adhesion
- Seals joints, gaps, and holes on: roof, gutter, flashing, downspout, drainpipe
- Seals and adheres: PVC pipes and fixtures
- Seals gaps and joints between metal & glass
For preparation of substrate, make sure that the surface is clean, dry, free of impurities and uncontaminated by oil or grease. You may need to roughen smooth surfaces to ensure good adhesion.
Method of Application
To use, first, cut nozzle to desired size. Then insert cartridge into the caulking gun. Push sealant ahead for uniform bead size. If there’s excess sealant, clean it off with solvent.
Note 1: The cure progresses inward from the surface. The sealant forms a tack skin free at a minimum of 8 minutes at room temperature. Tooling is not practical after this skin begins forming and should be completed in 5-7 minutes from application, even though this may require alternate periods of applying and tooling.
Note 2: Curing time is affected by:
Temperature and relative humidity- Higher temperatures and lower humidity achieves faster curing.
Degree of confinement- Faster curing time with lower degree of confinement
Cross-sectional thickness of the sealant- Curing time increases with the thickness of the sealant. A 1/8” section may cure in 24 hours but a 1/2” section may cure in 3-4 days.