Pioneer Pro Watertite 102 4.54kg 26035
Pack size: 4.54kg kit
PIONEER PRO Water-Tite 102 is a two-component flexible cementitious waterproofing
membrane, which consists of selected cement with well-graded fillers and synthetic resins.
Features and Benefits
- Easy to use (no primer needed)
- Can be applied to damp substrates
- Factory blended (ensure quality control at site)
- Canopies, balconies, roof decks
- Toilets and baths, kitchen, laundry area
- Basement wall (positive side)
For preparation of substrate, make sure that the surface is clean, dry, free of impurities and uncontaminated by oil or grease.
Dampen the substrate before applying Pioneer Pro Water-Tite 102.
Method of Application
When mixing, pour part A, liquid, and add Part B, powder, into container. Mix for 5 minutes until homogenous and lump-free. Stir manually before use.
For horizontal and vertical surface, a roller or a brush may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane. Apply the first coat and work generously to fill all the pores and honeycombs. Allow the membrane to dry approximately 2 to 3 hours prior to application of second coat. The second coat must be applied crosswise, after applying the second coat to PIONEER PRO Water-Tite 102, allow a minimum curing time interval of 15 – 72 hours before laying the screed and commencing pond test.