Euroboor Magnetic Base Pipe Cutting Drill 30mm ECO.TUBE-30

Euroboor Magnetic Base Pipe Cutting Drill 30mm

The Euroboor TUBE.30 magnetic core drilling machine is suitable for both flat and pipe material. The TUBE.30 with patented shallow-field magnetic technology offers incredibly strong grip, even on steel as thin as 3 mm (1/8″). This magnetic core drilling machine automatically pivots to conform to any pipe of ø 76,2 mm (3“) or larger. The magnet does not require electricity, so all the power goes to the motor. This offers increased safety as the drilling machine will not release from the target material in the event of an unintentional power loss.

This machine features:

• High accuracy capstan hub
• Direct spindle drive
• Integrated tool cooling and lubrication

Additional features

Integrated slide and one-speed gearbox for:

• High accuracy
• Enlarged lifecycle
• Minimal vibration

High precision height adjustment for:

• Low maintenance
• Minimal wear correction

Features:

• No electricity required for magnetic base
• No loss of magnetic grip due to unintentional power loss
• Powerful hold on a wide range of steel thicknesses, curved and flat
• No special attachments needed for flat or curved surfaces
• Highly stable wide stance
• Magnets allow the machine to swing away for hole inspection or debris removal while keeping position

Case content

• 1 x TUBE.30 Magnetic drilling machine
• 1 x IBC.K25 pilot pin
• 3 x handles
• 1 x hex key 2.5 mm
• 1 x hex key 3 mm
• 1 x hex key 4 mm
• 1 x hex key 5 mm
• 1 x lubrication system
• 1 x bottle (200 ml) of IBO.10 cutting oil
• 1 x adapter Weldon 50 mm (IBK.50)
• 1 x user manual
• 1 x safety ear protection
• 1 x safety goggles
• 1 x safety gloves

Technical Specifications

• Annular cutting: Ø 7/16" - 1 3/16"
• Twist drilling: Ø 1/16" - 1/2"
• Countersinking: Ø 3/8" - 1 3/8"
• Length: 10 13/16"
• Width: 7 1/4"
• Height: 12 13/16" - 16 3/8"
• Stroke: 3 9/16"
• Weight: 24.3 lbs
• Magnet (L x W x H): 7 3/8" x 6 1/2" x 3 1/4"
• Magnetic force: 1175 lbs
• Minimal pipe diameter: 3"
• Minimal material thickness: 1/8"
• Motor power: 8.2 A
• Total power: 8.6 A
• Speed (no load): 775 rpm
• Speed (load 8.2 A): 400 rpm
• Spindle (Weldon): 3/4"
• Voltage: 110 - 120 V / 60 Hz, 220 - 240 V / 50 - 60 Hz