Smith Performance™ S103E 13.25 Litre Stainless Steel Concrete Sprayer

Smith Performance Sprayers are built to work as hard as you do.

They are durable, professional products with an emphasis on chemical resistance and built to withstand the most demanding work conditions.

The S103E 13.25 Litre Industrial and Contractor Series Stainless Steel Concrete Compression Sprayer is a durable solution for a wide variety of concrete applications. It will withstand the toughest solvent- or water-based chemicals in the toughest work conditions - including etching chemicals, diesel, bond breakers, sealers, curing compounds and more.

The easy-to-change Viton® seals are throughout the pump and shut-off with a tank made from A-Grade AISI-304 stainless steel inside and out making this sprayer highly resistant to chemicals - no need for epoxy coatings.

Features a 50-inch, synthetic rubber hose with nylon core for greater wear and chemical resistance against solvents and other harsh chemicals. Also, a 24-inch brass wand and shut-off with a removable 5 psi check valve located at the end of the wand to prevent liquid from dripping out after shut off is released.

The large, wide-mouthed opening is easy to fill, and the specially designed, four-prong locking mechanism seals the pump tightly against an internal O-ring.

The S103E also offers a pull-button pressure release valve making it quick, easy, and safe to release internal pressure prior to opening the canister.

Two brass flat fan nozzles (0.5 GPM angled at 95 Degree and 1 GPM angled at 110 Degree) included for multiple flow rates.

Also accepts Tee Jet® nozzles. NOTE: Product may be used with solvent-based sealers and other concrete chemicals compatible with Viton® based elastomers. Clean with water or Xylene.

Remove liquid from wand and hose. Remove pump after cleaning to ensure adequate drying. Do not use acetone-based chemicals - acetone will cause issues with seals and gaskets resulting in undesirable performance.

13.25 Litre capacity AISI-304 grade stainless steel tank (no need for epoxy coatings) built to withstand harsh concrete chemicals along with rugged transport and use.

Brass, 24-inch wand containing a no-drip valve stem and shut off with the highest quality Viton® seals for maximum chemical resistance

Four prong locking mechanism secures the pump tightly against an internal O-ring and also prevents over compression

Faster, easier repair - pump seals can be changed within minutes, which equals less downtime

Pull button pressure release valve safely releases internal pressure prior to opening the tank

Welded stainless steel wand holder for durability and dependability. When lifting the tank, the wand will not fall through.

Includes brass flat fan nozzles. Also accepts Tee Jet® nozzles