Betontools is offering free delivery on all orders when you spend over $199* conditions apply.

Ultra-Ever-Dry-Package with Sprayers

Ultra-Ever-Dry-Package with Sprayers

Ultra Ever Dry Package

COVERAGE: 6m2 / 1L UED

1L UED = 1L Bottom Coat + 1L Top Coat

FOR INDUSTRIAL USE ONLY.  NOT AVAILABLE TO CONSUMERS AT THIS TIME.

Product Description

Ultra-Ever Dry Bottom Coat – 1 Litre works with the Ultra-Ever Dry Top Coat – 1 Litre to form the two-part Ultra-Ever Dry coating which helps repel water and oil from coated surfaces, protecting against corrosion caused by moisture and keeping coated surfaces dry, clean, and free of ice. The bottom coat adheres to many surfaces, creating a base layer to which the Ultra-Ever Dry top coat bonds. This product must be applied with Ultra-Ever Dry Top Coat – 1  Litre and according to the instructions to be effective. The two-part coating adds a translucent white color and matte finish to coated surfaces after curing. The Ultra-Ever Dry Bottom Coat – 1 Litre uses a solvent called xylene to allow the active ingredients to be sprayed on for a thin, uniform coating. The bottom coat adheres to steel, aluminum, and other metals, as well as plastic, leather, fabric, wood, concrete, and many other materials. The two-part coating is non-flammable after application and suitable for indoor and outdoor use.

The two-part coating is classified as a superhydrophobic coating as it exceeds 150 degrees of contact angle when measuring the sphere of a drop of water on the surface; this means that water, upon contacting the coated surface, forms very round beads which roll off quickly, without leaving the surface moist. It remains superhydrophobic for 30 cycles in a Taber abrasion tester with a CS-10 abrasive wheel. The two-part coating is also oleophobic, which means that it repels refined oil and many other hydrocarbons.

During the application and cleanup of Ultra-Ever Dry coatings, the use of a National Institute for Occupational Safety and Health (NIOSH)-approved P100 half-face respirator with an organic vapor cartridge, safety glasses, and protective gloves is recommended. The two-part coating’s durability varies depending on exposure to abrasion, UV rays, and other outdoors conditions; recoating with the top coat will help extend Ultra-Ever Dry’s longevity.

 

Ultra-Ever Dry Top Coat – 1 Litre works with the Ultra-Ever Dry Bottom Coat – 1 Litre to form the two-part Ultra-Ever Dry coating which helps repel water and oil from a coated surface, protecting against corrosion caused by moisture and keeping coated surfaces dry, clean, and free of ice. The top coat forms a thin coating that fills its own interstitial spaces with trapped air molecules to prevent water and oil from wetting the coated surface. This product must be applied over Ultra-Ever Dry Bottom Coat – 1 Litre and according to the instructions to be effective. The two-part coating adds a translucent white colour and matte finish to coated surfaces after curing. The Ultra-Ever Dry Top Coat – 1 Litre uses a solvent called acetone to allow the active ingredients to be sprayed on for a thin, uniform coating. The top coat can help protect steel, aluminium, and other metals, as well as plastic, leather, fabric, wood, concrete, and many other materials. The two-part coating is non-flammable after application and suitable for indoor and outdoor use.

The two-part coating is classified as a superhydrophobic coating, as it exceeds 150 degrees of contact angle when measuring the sphere of a drop of water on the surface; this means that water, upon contacting the coated surface, forms very round beads which roll off quickly, without leaving the surface moist. It remains superhydrophobic for 30 cycles in a Taber abrasion tester with a CS-10 abrasive wheel. The two-part coating is also oleophobic, which means that it repels refined oil and many other hydrocarbons.

During the application and clean up of Ultra-Ever Dry coatings, the use of a National Institute for Occupational Safety and Health (NIOSH)-approved P100 half-face respirator with an organic vapour cartridge, safety glasses, and protective gloves is recommended. The two-part coating’s durability varies depending on exposure to abrasion, UV rays, and other outdoors conditions; recoating with the top coat will help extend Ultra-Ever Dry’s longevity.

Included in the Preval 2xPack:

2x Preval Sprayer Units

2x Glass bottles

2x Long dip tubes

Deliver twice the spray with the Preval 2Pack : two complete Preval Spray Systems in one money-saving package. Each versatile Preval sprayer is made in the USA and delivers 16oz. of almost any paint or liquid, offering unparalleled versatility for small projects and touch ups.

 



description added size action
Ultra-Ever-Dry-Online-Australia-Surface-Tension-Comparison 25/09/2018 581.74KB download
Ultra-Ever-Dry-Online-Australia-Applications-and-Trials 25/09/2018 350.72KB download
Ultra-Ever-Dry-Online-Australia-DS 25/09/2018 1.02MB download
Ultra-Ever-Dry-Online-Australia-TDS 25/09/2018 490.62KB download
Ultra-Ever-Dry-Online-Australia-FAQs 25/09/2018 924.16KB download
Ultra-Ever-Dry-Online-Australia-Bottom-Coat-MSDS 25/09/2018 263.85KB download
Ultra-Ever-Dry-Top-Coat-Online-Australia-MSDS 25/09/2018 264.76KB download
  • Views: 1180
  • Product Code: 4000-4001 PACK
  • Availability: In Stock
  • $699.00
  • Ex Tax: $635.45

Tags: ultra-ever-dry ultra-ever-dry-package, chemicals

The all new Bullseye 30 laser distance measurer is set to revolutionize laser distance measuring wit..
$125.00
Ex Tax: $113.64
 Steinel HG2320E Professional  Heat Gun -28%
HG 2320 E Established quality sets new standards. • New outstanding running time! • Precise workp..
$471.90 $339.00
Ex Tax: $308.18
Atlas Copco Now Husqvarna  AMD3000 4.1HP Diesel Drive Unit -23%
ATLAS COPCO now ( Husqvarna ) AMD3000 4.1HP Diesel Drive Unit. 2x Only Left at this Price.AMD 3000 i..
$2,860.00 $2,200.00
Ex Tax: $2,000.00
Bartell Scarifier CAGE BR-50078 -25%
Bartell Scarifier CAGE BR-50078 ..
$291.50 $220.00
Ex Tax: $200.00
Battipav C/W Wheels And Blade 1100mm CLASS1100 -3%
Tile cutter for straight and jolly (45° angle) cuts of single and double fired ceramic, porcelain st..
$2,702.70 $2,629.00
Ex Tax: $2,390.00
Battipav C/W Wheels And Blade 900mm CLASS900 -5%
Tile cutter for straight and jolly (45° angle) cuts of single and double fired ceramic, porcelain st..
$2,498.10 $2,361.70
Ex Tax: $2,147.00