Trowel Blades and Pans Australia | Betontools Australia — Page 2 Skip to content
Free Delivery to most areas AUS-Wide, when you spend over $199 Ex Gst T&C's Apply! See Shipping Info for Details.
Free Delivery to most areas AUS-Wide, when you spend over $199 Ex Gst T&C's Apply! See Shipping Info for Details.

Trowel Blades and Pans

Power trowels are must-have tools for anyone who works with concrete. While hand trowels are fine for do-it-yourselfers and laying concrete in small spaces, walk behind and ride-on power trowels are necessary for achieving flatness and productiveness. The right trowel machine blades are just as important as any of the tools you use. The blade you use depends on the phase of the job you are performing. The options for power trowels are float blades, float pans, and combination blades....

Power Trowel Float Blades

Floating occurs after the bleed water dissipates. The floating process removes bumps and fills valleys while also compacting the concrete. This is accomplished by using specially designed power trowel float blades. Float blades are made from low-carbon steel and are always in a completely flat position. This type of blade has a slight bend on all four sides to prevent digging into the concrete.

Power Trowel Combo Blades

Power trowel combo blades are made from high-carbon steel. These blades are used for both floating and finishing. The blades are smaller than float blades and larger than finishing blades.

During the finishing pass, the blade is run flat to further level the concrete surface. During finishing, the trailing edge is flat to give the concrete a hard, smooth finish. One advantage a finishing blade has over a combo blade is that it has two edges for wearing. The combination blade can’t be reversed once the blade is worn.

Combination and finish power trowel blades come in a range of thicknesses. They also come in a range of steel types that work better on either walk behind or ride-on trowel machines. The life expectancy of the blade determines whether your choice is the most cost-effective for your needs.

Plastic Trowel Blades

Once the concrete sets and tightens, steel blades will leave black marks on the surface. This is especially unacceptable for exposed concrete floors. Plastic trowel blades offer an alternative that doesn’t cause the same results. You can purchase plastic combination and finish style blades. Plastic finish blades allow you to eliminate the risk of leaving burnish marks on concrete or epoxy while still providing a hard-polished finish.

Why Shop for Trowel Machine Blades at Beton Tools

Beton Tools is an Australian importer and distributor of high-quality concrete and construction tools and products. We have the products you can rely on for professional results of construction and DIY projects. With more than 20,000 times to choose from, we have everything you need for your work, hobby, or a single project. If you need help finding somethingcontact us for more information.

Trowel Blades and Pans

Trowel blades and pans are replacement and spare parts for power trowel machines used in concrete floor finishing. Worn or damaged blades and pans directly affect the quality of the finished concrete surface, so using the correct replacement parts is essential for consistent results. At BetonTools, we stock professional trowel blades and pans to suit a range of power trowel machines across Australia.

Blades vs pans
Trowel blades are the individual steel finishing blades fitted to the rotating arms of a power trowel. They are used in the final finishing passes to burnish and harden the concrete surface. Float pans (or floating pans) are large disc-shaped attachments that replace the individual blades for initial floating passes on fresh concrete — spreading the load over a larger area for a smooth, flat result. Available in sizes to suit walk-behind and ride-on power trowel machines.

Related power trowel products
Also browse our trowel blades, trowel machine parts and accessories, and our full range of concrete tool accessories and concrete hand floats.

Order online with fast Australia-wide shipping or contact our team for product advice.

Filters

Flextool Trowel Blade Finish 150X375MM (4PK) FT-D40-2 FT201824-UNIT

Flextool
$72.34 - $72.34
$72.34  +GST
$72.34 - $72.34
$72.34  +GST
In stock

Flextool Trowel Blade Finish 150X375MM (4PK) FT-D40-2 FT201824-UNIT Various Flextool Combination Blades are designed for operators who wish to use ...

View full details
$72.34 - $72.34
$72.34  +GST
$72.34 - $72.34
$72.34  +GST

Flextool Trowel Blade Combi 185X320MM (4PK) FT-S34-18 FT201821-UNIT

Flextool
$56.84 - $56.84
$56.84  +GST
$56.84 - $56.84
$56.84  +GST
In stock

Flextool Trowel Blade Combi 185X320MM (4PK) FT-S34-18 FT201821-UNIT Various Flextool Combination Blades are designed for operators who wish to use ...

View full details
$56.84 - $56.84
$56.84  +GST
$56.84 - $56.84
$56.84  +GST

OX Trade Replacement Blades Style 8 Finishing Blade (Set of 4)

OX Tools
$97.55 - $97.55
$97.55  +GST
$97.55 - $97.55
$97.55  +GST
In stock

Suitable for 40" machines 3/8" BSW threads Heat treated - for better wear No. of Threaded Holes: 3 Size: 375x152mm Suits: OX-PT40 / Master Finish ...

View full details
$97.55 - $97.55
$97.55  +GST
$97.55 - $97.55
$97.55  +GST

OX Trade Style 1 Combination Blades (Set of 4) 34inch

OX Tools
$77.68 - $77.68
$77.68  +GST
$77.68 - $77.68
$77.68  +GST
In stock

Suitable for 34" machines 3/8-inch BSW threads Heat treated - for better wear Boxed for easy storage No. of Threaded Holes Size 2 322x187mm ...

View full details
$77.68 - $77.68
$77.68  +GST
$77.68 - $77.68
$77.68  +GST

Masterfinish by AG Pulie Finishing Blade MF34FB

MasterFinish by AG Pulie
$51.18 - $51.18
$51.18  +GST
$51.18 - $51.18
$51.18  +GST
In stock

Masterfinish by AG Pulie Finishing Blade MF34FBCarbon steel finishing trowelling machine blade Specifications: Length: 324mm Width: 152mm Weight: 4...

View full details
$51.18 - $51.18
$51.18  +GST
$51.18 - $51.18
$51.18  +GST

Masterfinish by A.G.Pulie MF440 1050mm Float Pan BO-41

MasterFinish by AG Pulie
$253.41 - $253.41
$253.41  +GST
$253.41 - $253.41
$253.41  +GST
In stock

Masterfinish by A.G.Pulie MF440 1050mm Float Pan BO-4140" Trowel Machine Floating PanSuits all 40" Trowel Machines with Heavy Duty Gearbox

$253.41 - $253.41
$253.41  +GST
$253.41 - $253.41
$253.41  +GST

Masterfinish by AG Pulie 30 inch Pan for 6 Blade Walk Behind Trowel

MasterFinish by AG Pulie
$206.00 - $206.00
$206.00  +GST
$206.00 - $206.00
$206.00  +GST
In stock

Masterfinish by AG Pulie 30 inch Pan for 6 Blade Walk Behind Trowel2x Prongs to Slip on Blades 

$206.00 - $206.00
$206.00  +GST
$206.00 - $206.00
$206.00  +GST

Masterfinish by A.G.Pulie MF436 940mm Float Pan BO38.5

MasterFinish by AG Pulie
$229.23 - $229.23
$229.23  +GST
$229.23 - $229.23
$229.23  +GST
In stock

Masterfinish by A.G.Pulie MF436 940mm Float Pan BO38.536" Trowel Machine Floating PanSuits all 36" Trowel Machines with Heavy Duty Gearbox

$229.23 - $229.23
$229.23  +GST
$229.23 - $229.23
$229.23  +GST

MasterFinish 46" 5/16 UNC Combination Blade - MF46CB

MasterFinish by AG Pulie
$91.14 - $91.14
$91.14  +GST
$91.14 - $91.14
$91.14  +GST
In stock

MasterFinish 46" 5/16 UNC Combination BladeSpecifications: Length: 355mm Width: 203mm Bolt Size: 5/16

$91.14 - $91.14
$91.14  +GST
$91.14 - $91.14
$91.14  +GST

MasterFinish 322 x 203mm Replacement Combination Blade - MF34CB

MasterFinish by AG Pulie
$56.59 - $56.59
$56.59  +GST
$56.59 - $56.59
$56.59  +GST
In stock

MasterFinish 322 x 203mm Replacement Combination BladeSpecifications: Suits: HS34-18 Combination Blade Size: 322 x 203mm Bolt Size: 3/8 BSW

$56.59 - $56.59
$56.59  +GST
$56.59 - $56.59
$56.59  +GST
Thor Tools PLASTIC Trowel Blade 46 inch - Finishing PK4 - Betontools Australia

Thor Tools PLASTIC Trowel Blade 46 inch - Finishing PK4

Thor Tools
$280.00 - $280.00
$280.00  +GST
$280.00 - $280.00
$280.00  +GST
In stock

PLASTIC FINISH BLADES 46inchBuilt to last Made with Polypropylene PP Material Eliminates the risk of leaving burnish marks on concrete or epoxy whi...

View full details
$280.00 - $280.00
$280.00  +GST
$280.00 - $280.00
$280.00  +GST
Thor Trowel Machine Trowel Blade for 4 or 6 Bladed 30" Edger - Betontools Australia
Thor Trowel Machine Trowel Blade for 4 or 6 Bladed 30" Edger - Betontools Australia

Thor Trowel Machine Trowel Blade for 4 or 6 Bladed 30" Edger

Thor Tools
$80.16 - $80.16
$80.16  +GST
$80.16 - $80.16
$80.16  +GST
In stock

Thor Trowel Machine Trowel Blade for 4 or 6 Bladed 30" Edger To Suit  Bartell 30" 4 Blade  Hoppt 30" 4 Blade Barikell 30" 4 Blade or 6 Blade, buy 3...

View full details
$80.16 - $80.16
$80.16  +GST
$80.16 - $80.16
$80.16  +GST
Hoppt 34" Combination Premium (Set 4) Trowel Blade - TBS34-18 - Betontools Australia

Hoppt 34" Combination Premium (Set 4) Trowel Blade - TBS34-18

Hoppt Construction Equipment
$60.00 - $60.00
$60.00  +GST
$60.00 - $60.00
$60.00  +GST
In stock

HOPPT 34" Combination Premium (Set 4) Trowel Blade Hoppt Set of 4 Trowel Blades 34" Premium Combination Imperial Thread No Bolts

$60.00 - $60.00
$60.00  +GST
$60.00 - $60.00
$60.00  +GST
Hoppt 24" Set of 4 Trowel Blades Finishing 4.75' X 9" - TB24 - Betontools Australia
Hoppt 24" Set of 4 Trowel Blades Finishing 4.75' X 9" - TB24 - Betontools Australia

Hoppt 24" Set of 4 Trowel Blades Finishing 4.75' X 9" - TB24

Hoppt Construction Equipment
$39.90 - $39.90
$39.90  +GST
$39.90 - $39.90
$39.90  +GST
In stock

HOPPT 24" Set of 4 Trowel Blades Finishing 4.75' X 9" Hoppt Set of 4 Trowel Blades - 24" Finishing 4.75' X 9" Metric Thread Bolts Inc

$39.90 - $39.90
$39.90  +GST
$39.90 - $39.90
$39.90  +GST
Cemtool 30" Ride On Pan CT30P

Cemtool 30" Ride On Pan CT30P

Cemtool Concrete Tools
$238.00 - $238.00
$238.00  +GST
$238.00 - $238.00
$238.00  +GST
In stock

Cemtool 30" Ride On Pan CT30PFeatures: Cemtool 30" Pan Length- 30" Width- 30" Used exclusively on the Cemtool CTRO30BS Ride on machine. (will not f...

View full details
$238.00 - $238.00
$238.00  +GST
$238.00 - $238.00
$238.00  +GST

Flextool Pan Float 1175mm/46" - 5 Bl-pin-flat BR-WH3505FLAT FT25FLAT-UNIT

Flextool
$291.96 - $291.96
$291.96  +GST
$291.96 - $291.96
$291.96  +GST
In stock

Flextool Pan Float 1175mm/46" - 5 Bl-pin-flat BR-WH3505FLAT FT25FLAT-UNIT Pan floats clip onto both finishing or combination blades. Pan floats wit...

View full details
$291.96 - $291.96
$291.96  +GST
$291.96 - $291.96
$291.96  +GST

Flextool Pan Float 1175mm/46" - 5 Blade-pin BR-WH3505 FT2H3505-UNIT

Flextool
$291.96 - $291.96
$291.96  +GST
$291.96 - $291.96
$291.96  +GST
In stock

Flextool Pan Float 1175mm/46" - 5 Blade-pin BR-WH3505 FT2H3505-UNITPan floats clip onto both finishing or combination blades. Pan floats with their...

View full details
$291.96 - $291.96
$291.96  +GST
$291.96 - $291.96
$291.96  +GST

Flextool Pan Float 1230mm/48" - 4 Blade-clip BR-11692 FT211692-UNIT

Flextool
$285.43 - $285.43
$285.43  +GST
$285.43 - $285.43
$285.43  +GST
In stock

Flextool Pan Float 1230mm/48" - 4 Blade-clip BR-11692 FT211692-UNIT Various Flextool Pan Floats are designed to clip onto both finishing or combina...

View full details
$285.43 - $285.43
$285.43  +GST
$285.43 - $285.43
$285.43  +GST

Flextool Pan Float 1040mm/41" - 4 Blade-clip BR-B440PAN FT240PAN-UNIT

Flextool
$255.45 - $255.45
$255.45  +GST
$255.45 - $255.45
$255.45  +GST
In stock

Flextool Pan Float 1040mm/41" - 4 Blade-clip BR-B440PAN FT240PAN-UNIT Various Flextool Pan Floats are designed to clip onto both finishing or combi...

View full details
$255.45 - $255.45
$255.45  +GST
$255.45 - $255.45
$255.45  +GST

Flextool Trowel Blade Combi 195X370MM (4PK) FT-S40-18 FT201822-UNIT

Flextool
$82.67 - $82.67
$82.67  +GST
$82.67 - $82.67
$82.67  +GST
In stock

Flextool Trowel Blade Combi 195X370MM (4PK) FT-S40-18 FT201822-UNIT Various Flextool Combination Blades are designed for operators who wish to use ...

View full details
$82.67 - $82.67
$82.67  +GST
$82.67 - $82.67
$82.67  +GST

OX Trade Replacement Blades Style 10 Finishing Blade (Set of 4)

OX Tools
$55.37 - $55.37
$55.37  +GST
$55.37 - $55.37
$55.37  +GST
In stock

Suitable for 24" edging machines 4 Bladed Models M16 threads Heat treated - for better wear No. of Threaded Holes: 2 Size: 230x120mm Suits: OX-PT2...

View full details
$55.37 - $55.37
$55.37  +GST
$55.37 - $55.37
$55.37  +GST

OX Trade Replacement Blades Style 9 Finishing Blade (Set of 4)

OX Tools
$73.84 - $73.84
$73.84  +GST
$73.84 - $73.84
$73.84  +GST
In stock

Suitable for 36" machines 5/16" UNC threads Heat treated - for better wear No. of Threaded Holes: 3 Size: 375x152mm Suits: OX-PT34 / OX-PT36 / Fle...

View full details
$73.84 - $73.84
$73.84  +GST
$73.84 - $73.84
$73.84  +GST

OX Trade Replacement Blades Style 7 Finishing Blade (Set of 4)

OX Tools
$100.14 - $100.14
$100.14  +GST
$100.14 - $100.14
$100.14  +GST
In stock

Suitable for 46" 48" machines 5/16" UNC threads Heat treated - for better wear No. of Threaded Holes: 6 Size: 455x152mm Suits: OX-PT46 / Master Fi...

View full details
$100.14 - $100.14
$100.14  +GST
$100.14 - $100.14
$100.14  +GST

OX Trade Style 6 Combination Blades (Set of 4)

OX Tools
$97.55 - $97.55
$97.55  +GST
$97.55 - $97.55
$97.55  +GST
In stock

Suitable for 34" 36" ;machines 5⁄16" UNC threads 8 x replacement bolts No. of Threaded Holes Size 3 355x187mm Suits: OX-PT34 / Suits: OX...

View full details
$97.55 - $97.55
$97.55  +GST
$97.55 - $97.55
$97.55  +GST

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare